Good for 1.5 to 2 baths in moderate climates or 2 to 2.5 baths in warm climates
The N-180 tankless water heater from Titan is capable of producing enough hot water to service homes with up to two baths in moderate climates. If you have a home with 2 baths where the incoming water temperature is about 65 degrees, this is the heater for you. Alternatively if you life further south in warm climates, this heater will produce hot water for 2.5 baths.
The space saving benefits are also undeniable. At 50 gallons, the standard 3 bedroom 2 bath conventional tank heater takes up about 20 cubic feet of space and weighs about 130lbs. The Titan N-180 tankless water heater takes up about .29 cubic feet and weighs only 9.8 pounds making it 80 times smaller than a conventional heater and making delivery, installation and service, a breeze.
- Made in the USA
- Whole house capacity- Large Homes
- Thermostatically control temp on front cover
- 60% energy savings vs. conventional electric water heaters
- 99.5% efficient
- On demand water control - equals unit longevity and savings
- For use with hard, soft, well or city water
- Most efficient and practical product of its kind on the market
- Steel outer / copper-brass inner casing
- UL approved #499
- ANSI-Z 10.03 certified
- 10 year warranty on water carrying components - 1 year on rest of unit
- Pipe Fittings: 3/4"
- 18KW at 220V
- 75 amps - 2 double pole 40 amp breakers required. 2, 8/2 wire line
- Dimensions: 10.5" x 9" x 4.5" inches
- Weight: 11.6 lbs
QUESTIONS & ANSWERSAsk a Question
What do the 3 modes mean on an N-180?
On the Titan N-180 tankless water heater, you'll notice a "Mode" button alongside the temperature adjustment buttons. This "Mode" button is used to check Volts, Kilowatts, and Amperage. However, this button is a diagnostic tool for technicians only, and does not change the operation of your tankless water heater - so if you've pushed this button, don't worry.
Does this unit come with a warranty?
All Titan brand water heaters feature a 1-year warranty on all electrical components, as well as a 10-year warranty against any internal leaking components of the unit.
What size fittings does this unit have?
The Titan N-180 tankless water heater uses 3/4” fittings on both the inlet and outlet, both located on the bottom of the unit.
What electrical specifications are required for this unit?
The Titan N-180 tankless water heater runs on 240 volts, and is a two-line heater, drawing 75 amps. It calls for 2 Double Pole 40 amp breakers, and 8/2 wire (8 gauge).
How many bathrooms can this unit provide hot water for?
The Titan N-180 tankless water heater is a large capacity unit, with 18KW of heating power. This unit is ideal for 2.5 baths in warm climates, and up to 1.5 bathrooms in colder climates.