Stiebel Eltron DHC 10-2 Point-Of-Use Tankless Water Heater 9.6KW
Having trouble selecting the right heater? We're only a phone call away until midnight every day.
Call us at 305-823-6991
Ideal For All Point-of-Use Water Heating Applications
The Stiebel Eltron DHC tankless water heaters are designed for installation at the point of use. They heat water instantaneously as it flows through the unit. Stand-by losses are completely eliminated.
The heating elements are controlled by a flow switch and by an exclusive scald-guard thermostat, which keeps the water temperature within safe limits at all times. In addition, the DHC water heaters are equipped with a safety high-limit with manual reset. The rugged all copper design ensures many years of reliable service.
The Stiebel Eltron DHC tankless water heaters are ideal for restrooms or kitchenettes in an office or commercial / industrial setting
Details
- Meticulously Made in Germany
- Extremely compact design saves space
- Major energy savings
- Unlimited supply of hot water
- Proven reliabiliy
- Sleek design is appealing and can be mounted in plain sight
- ETL, WQA and ISO 9001 Certified!
- Simple instructions for installation ease
- Warranty: 7 Years Leakage / 3 Years Parts
Tech Specs
- Pipe Fittings: 1/2"
- 9.6KW at 240V
- 40 amps- 1 double pole 50 amp breaker required. 1, 8/2 wire line
- Dimensions: 14-3/16" x 7-7/8" x 4-1/8" inches
- Weight: 5.3 lbs
Diagram
QUESTIONS & ANSWERS
Ask a Question-
Does this unit come with a warranty?
All Stiebel Eltron brand water heaters feature a 3-year warranty on all electrical components, as well as a 7-year warranty against any internal leaking components of the unit.
-
What size fittings does this unit have?
The Stiebel Eltron DHC 10-2 tankless water heater uses 1/2” fittings on both the inlet and outlet, both located on the bottom of the unit.
-
What electrical specifications are required for this unit?
The Stiebel Eltron DHC 10-2 tankless water heater draws 40 amps, thus requiring a Double-pole 50amp breaker, and 8/2 wire (8 gauge).
-
What applications is this unit best used for?
The Stiebel Eltron DHC 10-2 tankless water heater serves best when used as a point-of-use unit for smaller applications such as a boat, RV, or small condo. With 9.6KW of heating power, this unit will adequately heat up to 1 bathroom in warm climates, or a sink in moderate climates. These are typically installed under a sink, or near the demand location.
-
Can this unit be mounted upside down with inlet & outlet on top?
No sir.
-
Can this be used in a Daisy Chain configuration? My inlet water temp is 55 degrees. My pipes run in a concrete slab. This bathroom is at the far end of the house. I want to feed this with "hot water." Currently, it takes about 3 minutes for the water to heat up that is coming from the main house water heater so this unit will heat for about 3 minutes and then do nothing. My goal is to reduce the three minutes to something more manageable. I realize I will still be losing a lot of heat to the pipes in the slab. I don't have enough power available to put in a larger unit in this location.
Yes you may do so. We consider that set up as a booster system.
-
Can the unit be installed on its side
Not recommended. Upright only.
-
How do you adjust the temperature
On this model the temp. is set to high at all times. It's non-adjustable.
-
What is the min water flow to actavate heat switch
There's no heat switch on this heater. Please call our tech dept at 305-823-6991.
-
Can you lay the unit flat?
Yes you may.
